Hi,
I am using a TS-7260 board running Linux 2.4.26-ts11 kernel, with a TS-GSM1 +
WaveCOM Q64 GSM modem on-board.
>From a terminal emulator, I am able to control the GSM modem to activate a PDP
>context, using AT commands AT+CGDCONT and AT+CGACT.
But when I tried to do PPP dialup using pppd, I got the following error
message:
$ pppd /dev/tts/0 115200 modem crtscts -detach noipdefault connect
'/usr/sbin/chat -v -s -f /etc/ppp/chat/gprs'
pppd: This system lacks kernel support for PPP. This could be because
the PPP kernel module could not be loaded, or because PPP was not
included in the kernel configuration. If PPP was included as a
module, try `/sbin/modprobe -v ppp'. If that fails, check that
ppp.o exists in /lib/modules/`uname -r`/net.
See README.linux file in the ppp distribution for more details.
I tried '/sbin/modprobe -v ppp' but failed.
$ /sbin/modprobe -v ppp
insmod ppp
insmod: ppp.o: no module by that name found
modprobe: failed to load module ppp
There is no ppp.o module under /lib/modules/2.4.26-ts11. The directory 'net' is
not even there.
Would like to know how to get the ppp.o module installed?
Thanks.
KokHua
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|