ts-7000
[Top] [All Lists]

Re: [ts-7000] industrial wireless options

To:
Subject: Re: [ts-7000] industrial wireless options
From: Simon Leung <>
Date: Tue, 19 Apr 2011 08:45:40 +0100
I need constant connection because the TS7800 acts as a web server. 
We're currently using 3G but not entirely happy with the 
stability/performance.


On 18/04/11 23:54, Michael DeGroot wrote:
>
>
> What are your data requirements?  Do you need a constant connection to 
> the system, or do you just need periodic reports of values (once per 
> hour, daily summary, other?)
>
> Do you have cellular coverage and access to power in the area?
>
> On Mon, Apr 18, 2011 at 6:48 AM, Simon Leung < 
> <>> wrote:
>
>     On 18/04/11 14:35, Jason Stahls wrote:
>     > -----BEGIN PGP SIGNED MESSAGE-----
>     > Hash: SHA1
>     >
>     > On 04/18/11 08:17, Simon Leung wrote:
>     >> Hi all,
>     >>
>     >> I came from a consumer background and am new to the industrial
>     world.
>     >> We're building a web enabled wireless control/monitoring unit
>     based on
>     >> ts7800. To me, GPRS/3G is the only viable way of doing this.
>     However,
>     >> it's a bit of challenge to keep the link stable.
>     >> I'd like to ask you if there re any other options at all in an
>     >> industrial environment?
>     > There's _tons_ of industrial RF products out there. What exactly are
>     > you doing?
>     >
>     > Unless you're in a remote area that you can't do a
>     point-to-point link
>     > with 3G is probably not the best idea. The cell network is basically
>     > like using UDP/IP for everything, there's no guarantee anything
>     will go
>     > anywhere, nor when it will get there if it does go.
>     >
>     Thanks for the reply. I'm building a box that'll allow the user to
>     remotely control a water quality analyser, through a web
>     interface. Most
>     of our application would have wired LAN access but there are cases
>     where
>     the machine is in a remote area. So basically the device will have to
>     have TCP/IP wirelessly ( or I'm on a completely wrong direction ).
>     Again
>     I'm not used to industrial standard, etc. So if there is a remote
>     wireless TCP/IP solution, I'm all ears.
>
>
>
>
> 



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU