pdrowley wrote:
> Has anyone had luck using the COM2 serial port on the TS-8390?
>
> I've tried nearly every device, with no luck. I believe it must be
> /dev/ttymxc2, as the schematics show that RS-232 TX/RX are on UART3 -
> however, I get nothing when sending characters to this device.
>
> Any help would be greatly appreciated.
It was working on my board, but I have now moved to one of the USB
ports. My recollection is that I didn't have any trouble, it just
worked. /dev/ttymxc[0-2] just showed up. 0 is the console port, 1 is the
first extra port, 2 is the second. I used the first but didn't try the
second.
I think I installed minicom and put on a loopback plug when I was
exploring which devices to use.
Regards,
Jim Ham
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1204 / Virus Database: 1498/3512 - Release Date: 03/17/11
>
>
--
Porcine Associates LLC
244 O'Connor St.
Menlo Park, CA 94025
USA
+1(650)326-2669 fax +1(650)326-1071
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
jimham.vcf
Description: Vcard
|