[ts-7000] NVRAM for the TS7500 board

ts-7000

[ts-7000] NVRAM for the TS7500 board

To:
Subject:	[ts-7000] NVRAM for the TS7500 board
From:	"" <>
Date:	Sun, 13 Mar 2011 22:23:46 -0000

I needed a battery backed up RAM for a few bytes of data and replaced the RTC 
chip with one which provides that function. You can read more and get the 
driver at http://oao.no/wpe/2011/02/ts7500-nvram/




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] NVRAM for the TS7500 board, oaox@rocketmail.com <= [ts-7000] in_[0-3] and out_[0-4] for the TS-8390 and TS-4800, Jim Ham

Previous by Date:	[ts-7000] TS-7800 SSH doesn't work on Etch-EABI-Armel, thriftyrocker
Next by Date:	[ts-7000] in_[0-3] and out_[0-4] for the TS-8390 and TS-4800, Jim Ham
Previous by Thread:	[ts-7000] TS-7800 SSH doesn't work on Etch-EABI-Armel, thriftyrocker
Next by Thread:	[ts-7000] in_[0-3] and out_[0-4] for the TS-8390 and TS-4800, Jim Ham
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU