ts-7000
[Top] [All Lists]

Re: [ts-7000] COM2 and COM3 on a TS-8100 with a TS-4200 socket macrocont

To:
Subject: Re: [ts-7000] COM2 and COM3 on a TS-8100 with a TS-4200 socket macrocontroller
From: Bekir Bahadir <>
Date: Wed, 9 Mar 2011 14:07:46 +0100


did you modify the /etc/securetty?

2011/3/9 ozi_jdavid <>
 

Hi All,

I am having some difficulty getting COM2 and COM3 to work on a TS-8100 with a TS-4200 socket macrocontroller installed. I am using the latest interim-02232011 binary image, have tried both the previous binary images as well. I know that COM2 is mapped to '/dev/ttyS3' and COM3 is mapped to '/dev/ttyS5'. Tried modifying '/etc/inittab' to allow getty for '/dev/ttyS3' and '/dev/ttyS5' but to no avail. Any ideas?

Thanks.

David.




__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU