[ts-7000] Re: COM2 and COM3 on a TS-8100 with a TS-4200 socket macrocontroller

["ozi_jdavid" <>]

I have modified the 'etc/securetty' to no avail. I have also probed pin 3 of 
the COM2 and COM3 header and there are no signals coming from it. If I probe 
pin 3 of the COM1 header I get some RS-232 signals. Any more ideas?

Thanks

--- In  Bekir Bahadir <> wrote:
>
> did you modify the /etc/securetty?
> 
> 2011/3/9 ozi_jdavid <>
> 
> >
> >
> > Hi All,
> >
> > I am having some difficulty getting COM2 and COM3 to work on a TS-8100 with
> > a TS-4200 socket macrocontroller installed. I am using the latest
> > interim-02232011 binary image, have tried both the previous binary images as
> > well. I know that COM2 is mapped to '/dev/ttyS3' and COM3 is mapped to
> > '/dev/ttyS5'. Tried modifying '/etc/inittab' to allow getty for '/dev/ttyS3'
> > and '/dev/ttyS5' but to no avail. Any ideas?
> >
> > Thanks.
> >
> > David.
> >
> >  
> >
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/