--- In Jason Stahls <> wrote:
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On 03/08/11 05:06, pebcobhat wrote:
> > I am just familiar with the Linux and Ts 7200 SBC.
> > My Kernal version: 2.4.26, I have loaded TS supplied Debian Woody after
> > ext2 formating as per TS User manual.
> > My objective is to activate gcc which comes with the Debian, on the CF Card
> > on SBC. ( that what the namual says) to compile programs.
> > at # gcc returns "gcc not found", same with apt, or apt-get or man xxx.
> >
> > #echo $PATH command shows PATH to /usr/bin/
> >
> > But
> > On my Ubuntu (10.04, Lucid) I plug in the USB dongle with CF Card card, and
> > I can see in usr/bin/ directory lots of commands like, apt-get and gcc ans
> > g++-3.0, g++-2.95
> >
> > Can some one explain what is happening. How can I use the compile on the CF
> > Card when I am on the SBC.
> > OR does the TS Debian ( Woody) comes with the gcc compiler or not?
> > Any help is appreciated.
>
> You're still running off flash and in the TS-Linux environment from the
> sounds of it. If you run something like ls --help does it tell you
> something about busybox multicall binary?
>
> To boot to the CF card you either need to boot off it by changing the
> kernel command line in redboot or pivot_root to a mounted CF card.
> Either way, you might want to update a little, Woody is _really_ old esp
> when Etch is available and 2.6.30+ kernels. There's lots of talk about
> running 2.6 and etch in the last few months on the list here. With a
> few minor exceptions/differences most information on the TS-7250, 7260,
> 7300, 7400 will all be applicable.
>
> - --
> Jason Stahls
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.16 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
>
> iQEcBAEBAgAGBQJNdjTPAAoJEBWmhVAMrS/gLEsIAJcdwBS8fFT8mCNrejECYnEg
> Vte72kqyQPRubsUTOQaqIu1Ej6YN2MdUuu3bPtC3ODtAgzbbyrwQ9qXhCSt7kvgA
> pbtJCrLsWZt3zcKR2yUY9tovh99R+eSutrLmorJhfDB1NaxQIY3wbwHpSBHe1kAO
> Ljp63/KaQu2I334BvNUP9Ze5igQMDzh5aBM1uKLJNkTrXV7CA+NHQlq5kHLdr8WI
> tQzpUAd0WAg+CiIRGqMcdL9iu4WIAmhA9nE7njueNYIl1HHM/DhXMC74jU44iGw/
> 8PiixwG4tfdQOdLck92XyMaH5/ldH+2gxSKv1JNVm+tf+BmaWBFr8ER4RZmEHVY=
> =rGXk
> -----END PGP SIGNATURE-----
>
Thanks Jason,
Yes if I do a ls --help I get the following
BusyBox V1.00-rc2 (2004.08.05:44+0000) multi-call binary
Usage:ls ............
Could you please let me know how to change the kernal command line in the
redboot ( I am relatively new to Linux, I can just get around).
Or even better how to update the kernel to 2.6.30 if that can solve my problem
Thanks in advance
pebcobhat
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|