ts-7000
[Top] [All Lists]

Re: [ts-7000] How to Replace my kernel

To:
Subject: Re: [ts-7000] How to Replace my kernel
From: Don Tucker <>
Date: Tue, 01 Mar 2011 10:11:51 -0600
The first thing that I would check would be the kernel command line 
(CONFIG_CMDLINE in the .config file). It sounds like you have might it 
configured to mount the root file system from an NFS host, which you may 
not have set up.

Don
>
>
> I then try to boot the board and get this on COM1:
>
> >> TS-SDBOOT - built Jul 6 2006
> >> Copyright (c) 2006, Technologic Systems
> .
> .
> .
> Kernel panic: VFS: Unable to mount root fs on 01:00
>
> Am I making really obvious mistakes here?
>
> If someone can point me in the right direction I would be grateful.
>
> Tom
>
> 


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU