--- In "gmaglathlin" <> wrote:
>
> Actually if you use version 4 of the FPGA core a programmable SPI
> interface is supported.
Hi All,
I am having devil of a time getting anything SPI to work on a TS-7500.
I have two setups, one with they TS-752 and one without. They both boot to the
TS provided image just fine.
I have been assuming that the SPI interface mentioned above is spictl.
On the TS-7500 with the TS-752 I can get the temperature using the sbus_poke
method
On either system when I give the
ts7500:~/spictl# ./spictl.1 -e 1 -c 2000000 -l 1 -w 04:00 -d 01:02 | hexdump -C
Error: FPGA bitstream is out of date.
ts7500:~/spictl#
I have twiddled with various parameters and get the same results.
Error: FPGA bitstream is out of date.
I have these questions:
How can I tell what version of the FPGA I have?
Has any one gotten the spictl to work on the TS-7500?
In the end I would like to communicate from the TS-7500 to and ADS1210
digitizer. If anyone has any hints, I am sure ready to humbly accept them.
Saludos,
Angel
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|