[ts-7000] Re: 2.6.29-ts on TS-7260

["daliborfarny" <>]

--- In  "Rekcut_Nod" <> wrote:
>
> Has anyone managed to get this combination running?  I tried to get this image
> 
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/binaries/ts-images/512mbsd-7400-linux2629-lenny-eabi.dd.bz2
> 
> to boot with a rebuilt kernel using this source
> 
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/sources/tskernel-2.6.29-ts-src.tar.gz
> 
> and a config file that I used with a 2.6.21-ts kernel, but the the resulting 
> SD card just keeps rebooting after the second '.' following the "TS-BOOT" 
> message.
> 
> I am only considering doing this because the 2.6.21-ts driver for the TS-ETH2 
> card (ax88796b) seems to have issues. :(
> 
> Don
>

Hello Don,

I was not successful with images from embeddedarm.com, I tried different block 
sizes (bs parameter) on dd to make it work... Then I found that howto: 

http://www.quakefinder.com/smf/index.php?topic=103.0

and there is a link on the image they made and that worked:

http://www.quakefinder.com/smf/EQTdata/their2.6.dd

I dd'd on the 4GB SDHC card with bs=2048 and it worked. It is 2.6.29-ts kernel. 
I needed some other kernel modules, so I recompile the kernel from the source 
on embeddedarm (2.6.29-ts) with slightly changed configuration and everything 
ok..

Dalibor



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/