> can someone confirm the DIO pins work on the ts-7260 using the provided
> scripts ?
>
>
Hello,
probably the same problem,
I am not able to control DIO pins from user space. Tried C code via
registers, peekpoke, GPIO kernel modules, but nothing worked. The pins are
still high (log 1). LED connected to the pin is still lighting.
The only thing I managed is to read the pins, when I connect it to ground,
I can read log 0, log 1 when disconnected.
Thanks in advance for any tips..
Dalibor
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|