I'm not using a custom kernel/distribution, just what I received from
Technologic Systems:
# uname -a
Linux ts7800 2.6.21-ts #1 PREEMPT Fri Oct 10 10:20:42 MST 2008 armv5tejl
GNU/Linux
# cat /etc/issue
Debian GNU/Linux 3.1 \n \l
# cat /etc/debian_version
3.1 Sarge
The micro-SD card is in before powering on the board. I tried removing and
reinserting it but it's not detected. When trying to remove the tssdcard module
I get an error about it being in use (by the SD that I boot from, of course).
--- In "Kris" <> wrote:
>
> If you are using the stock kernel and distribution you need to make sure the
> card is in before you apply power to the system. Or remove and reinsert the
> tssdcard.ko driver.
>
> -Kris Bahnsen
> Technologic Systems
>
>
> --- In "tiberiu_szm" <tiberiu_szm@> wrote:
> >
> >
> >
> > I'm using the 2GB SD card I received included in my order (alongside the
> > Eclipse IDE and other tools/samples/docs on the FAT partition). As far as
> > the distribution is concerned I think it's Debian Sarge and the kernel is
> > 2.6.21-ts7800.
> >
> > Should these allow me to detect the micro-SD correctly or do I need an
> > update of some sort?
> >
> > --- In "Kris" <kristechnologic@> wrote:
> > >
> > > If you are using the stock kernel and distribution you need to make sure
> > > the card is in before you apply power to the system. Or remove and
> > > reinsert the tssdcard.ko driver. You may not have support for the
> > > microSD card if you are using a non-stock SD card image.
> > >
> > > -Kris Bahnsen
> > > Technologic Systems
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|