thomaslloyd wrote:
> I am just starting out in the world of TS-7300, Linux and Electronics. I
> have got the TS-7300 and need to attach that to a 240x320 LCD being
> controlled by a S1D13700F01. I am connecting to the LCD using the GPIO of
> the LCD connector on the board.
>
> I am struggling to understand the steps needs to get Linux talking to
> that LCD. The LCD requires indirect memory addressing and I need some
> guidance on how to even begin working on this task.
>
> So far I have found a frame buffer driver for the S1D1xxxx range of
> chips.
Get a copy of the datasheet for at least one of the chips supported by that
frame buffer driver and also for the specific chip on the LCD you have (if
they are different chips). Some information on writing Linux device drivers
will be of some help.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|