[ts-7000] LCD Driver Writing

["thomaslloyd" <>]

Hi All,


I am just starting out in the world of TS-7300, Linux and Electronics. I have 
got the TS-7300 and need to attach that to a 240x320 LCD being controlled by a 
S1D13700F01. I am connecting to the LCD using the GPIO of the LCD connector on 
the board. 

I am struggling to understand the steps needs to get Linux talking to that LCD. 
The LCD requires indirect memory addressing and I need some guidance on how to 
even begin working on this task. 

So far I have found a frame buffer driver for the S1D1xxxx range of chips. This 
I am sure will need modifying as it was originally writen for a different model.

What steps do i need to take getting Linux to know it has the LCD connected? 
How does Linux know where i have connected the LCD on the EP9302. Then how does 
the frame buffer know the specifics of the LCD controller?

I hope to eventually use an xserver to display an basic app. 

Any help would be great. Would love to get something to read that explains this 
to me. 

Thanks,

Tom

I have been unable to find any good reading material to get up to scratch on 
this whole subject. I know it is a lot of work. 


Thanks,

Tom   



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/