I have a TS7260 and I found a file on the embeddedARM ftp site
(ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/) called lcdmesg.h that
gave me a starting point for the LCD stuff.
Maybe you can use the same file or maybe they have a different one for your
kind of board.
-S
--- In "thomaslloyd" <> wrote:
>
> Hi All,
>
>
> I am just starting out in the world of TS-7300, Linux and Electronics. I have
> got the TS-7300 and need to attach that to a 240x320 LCD being controlled by
> a S1D13700F01. I am connecting to the LCD using the GPIO of the LCD connector
> on the board.
>
> I am struggling to understand the steps needs to get Linux talking to that
> LCD. The LCD requires indirect memory addressing and I need some guidance on
> how to even begin working on this task.
>
> So far I have found a frame buffer driver for the S1D1xxxx range of chips.
> This I am sure will need modifying as it was originally writen for a
> different model.
>
> What steps do i need to take getting Linux to know it has the LCD connected?
> How does Linux know where i have connected the LCD on the EP9302. Then how
> does the frame buffer know the specifics of the LCD controller?
>
> I hope to eventually use an xserver to display an basic app.
>
> Any help would be great. Would love to get something to read that explains
> this to me.
>
> Thanks,
>
> Tom
>
> I have been unable to find any good reading material to get up to scratch on
> this whole subject. I know it is a lot of work.
>
>
> Thanks,
>
> Tom
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|