|
Hi all, I would like to update the yaffs image of the on-board flash. As described in the mannual, I should firstly boot the board by a NFS server, and then eraseall contents on /dev/mtd/1. Now, I can boot the board by NFS. However, there are two problems. 1. There is no /dev/mtd/1 file on the /dev folder. Therefore, when I input the command "mount /dev/mtdblock/1 /mnt", the error information shows "Mounting /dev/mtd/1 on /mnt failed: No such file or directory". 2. eraseall command is not included in the file system with the error "-sh: eraseall: not found". Could anybody give me some suggestions to fix these two problems? Thank you so much. Best
Regards, Xiang Lu
__._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |