ts-7000
[Top] [All Lists]

[ts-7000] bridging ppp0 and eth0 in 2.4.26 kernel?

To:
Subject: [ts-7000] bridging ppp0 and eth0 in 2.4.26 kernel?
From: "Rekcut_Nod" <>
Date: Tue, 28 Dec 2010 04:28:54 -0000
Has anyone tried to do this with the Debian SD image?  There seems to be bridge 
support in the kernel (module bridge.o).  Some of my Google results on the 
topic seem to indicate that you can't bridge these two kinds of interfaces, but 
this says that you can:

http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge#What_can_be_bridged.3F

I would really prefer to do things this way, rather than using IP Masquerading, 
if possible, as I have multiple interfaces that I want to bridge to a single 
interface, only one of which is PPP, and I'd hate to have to do everything 
completely differently for that one interface.

Don



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
  • [ts-7000] bridging ppp0 and eth0 in 2.4.26 kernel?, Rekcut_Nod <=
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU