lcdmesg.c must download and compile it, if your LCD like this
http://www.lumex.com/specs/LCM-S02004DSF% 20D-Y.pdf who says he has should
enable one to initialize, if so, go to file, place a file there called
metodolcdteclado.tar, if you have to use the keypad and LCD, with the command
(0xxx) carry out the deed according to the line you want or if you want to move
information
--- In ALÃ? <> wrote:
>
> Is there anybody who run the LCD(hd44780)(4x20 characters) on TS-7300 board?
> How can I run the LCD on TS-7300? I have tried
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7300-linux/samples/arm-binaries/lcdmesg
> binary file. However, the support of Technologic Systems said that
> The lcdmesg binary file is for 2x20 LCD screen. So, It is not work 4x20 LCD
> screen.
>
> I am waiting your helps.
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|