the binary you are trying to run is for the ts 7200 and is for a 2-line LCD,
shared files in a file called lcdTS7200, which allows the initialization of the
LCD, writing in the CGRAM and just as the reading of CGRAM the lcs of 2 lines,
according to which lcd read 4 line has 2 enable the initialization process is
the same, so you know which port is connected and make the process of
initialization
--- In ALÃ? <> wrote:
>
> Is there anybody who run the LCD(hd44780)(4x20 characters) on TS-7300 board?
> How can I run the LCD on TS-7300? I have tried
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7300-linux/samples/arm-binaries/lcdmesg
> binary file. However, the support of Technologic Systems said that
> The lcdmesg binary file is for 2x20 LCD screen. So, It is not work 4x20 LCD
> screen.
>
> I am waiting your helps.
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|