[ts-7000] ethernet port turns off when using signals enable, rs, rw

["josue.cubero" <>]

I am using a ts 7200 
hello, I could enter the LCD CGRAM, and display the contents of the CGRAM in 
the LCD but when I use enable signals, rs, rw ethernet port turns off (the LED 
turns off port and does not allow communication with this port), I am directing 
the Register Map 0x8084_0044 LCD_EN, LCD_RS, LCD_WR direction reg. (bits3-5)
0x8084_0040 LCD_EN, LCD_RS, LCD_WR data reg. (Bits3-5)
This enabling as outputs these signals to 0xFF, if there is not going my 
problem, I'm also using the signals D0 to D7, if you only use data 0x8084_0000 
LCD_7 LCD_0 thru register (R / W) and direction LCD_7 0x8084_0010 LCD_0 thru 
register (R / W) ethernet port is does not turn off
In the console does not tell me any error or warning
sorry, my English is not very good



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/