Re: [ts-7000] Dusting off my TS-7260

[fred basset <>]

To get access via a serial cable it should be as simple as connecting a crossover cable from COM1 on the 7260 to a port on your PC, firing up Minicom, setting the port to 115KN81 and you should be able to see the kernel messages as it boots up, unless you disabled this when you last worked with your board.

That should give you enough info. to see how far into the bootup process it's getting.

On Thu, Sep 30, 2010 at 7:00 AM, Mike Ingle <> wrote:

 

You should be able to download the users manual if you don't still have one.  Go to the Technologics web site.  I know that my ts7300 had clear instructions on serial port bring up and network bring up.  Just a hint try ssh.  Telnet isn't usually turned on by default in modern linux systems.

Mike

On Sep 29, 2010, at 9:02 PM, Tommy wrote:

I don't even remember how to get into the board via serial cable.

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___