Re: [ts-7000] Dusting off my TS-7260

To:
Subject:	Re: [ts-7000] Dusting off my TS-7260
From:	Mike Ingle <>
Date:	Thu, 30 Sep 2010 07:00:05 -0700

You should be able to download the users manual if you don't still have one. Go to the Technologics web site. I know that my ts7300 had clear instructions on serial port bring up and network bring up. Just a hint try ssh. Telnet isn't usually turned on by default in modern linux systems.

Mike

On Sep 29, 2010, at 9:02 PM, Tommy wrote:

I don't even remember how to get into the board via serial cable.

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___

<Prev in Thread]	Current Thread	[Next in Thread>
Re: [ts-7000] Dusting off my TS-7260, Mike Ingle <= Re: [ts-7000] Dusting off my TS-7260, fred basset

Next by Date:	Re: [ts-7000] Re: stdarg.h not found, Kevin Cozens
Next by Thread:	Re: [ts-7000] Dusting off my TS-7260, fred basset
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU