It uses an FTDI USB-to-Serial chip so you also need the ftdi-sio driver.
--- In "ysuwansiri" <> wrote:
>
> Hi Guys,
>
> I'm a newbie. I am trying to connect a USB-Serial device to TS7200.
>
> I did "dmesg" command and it gives me:
>
> hub.c: new USB device not_pci-3, assigned address 4
> usb.c: USB device 4 (vend/prod 0x403/0x6010) is not claimed by any active
> driver
>
> I did lsusb and it shows:
>
> Bus 001 Device 001: ID 0000:0000
> Bus 001 Device 004: ID 0403:6010 Future Technology Devices International, Ltd
>
> I tried "mknod /dev/ttyUSB0 c 188 0" & "mknod /dev/ttyUSB1 c 188 1" &
> "modprobe usbserial vendor=0x0403 product=0x6010" & " insmod usbserial
> vendor=0x0403 product=0x6010"
>
> It did not work. I could not minicom to /dev/ttyUSB0 or /dev/ttyUSB1.
>
>
> How can I make the usb-serial device work?
>
> Thank you,
>
> Arm
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|