Blair,
Thank you for the email. I tried to download and ran "insmod ftdi_sio" but I
still could not see /dev/ttyUSB*. Any other suggestions?
Thank you,
Arm
--- In "Blair" <> wrote:
>
> It uses an FTDI USB-to-Serial chip so you also need the ftdi-sio driver.
>
>
> --- In "ysuwansiri" <ysuwansiri@> wrote:
> >
> > Hi Guys,
> >
> > I'm a newbie. I am trying to connect a USB-Serial device to TS7200.
> >
> > I did "dmesg" command and it gives me:
> >
> > hub.c: new USB device not_pci-3, assigned address 4
> > usb.c: USB device 4 (vend/prod 0x403/0x6010) is not claimed by any active
> > driver
> >
> > I did lsusb and it shows:
> >
> > Bus 001 Device 001: ID 0000:0000
> > Bus 001 Device 004: ID 0403:6010 Future Technology Devices International,
> > Ltd
> >
> > I tried "mknod /dev/ttyUSB0 c 188 0" & "mknod /dev/ttyUSB1 c 188 1" &
> > "modprobe usbserial vendor=0x0403 product=0x6010" & " insmod usbserial
> > vendor=0x0403 product=0x6010"
> >
> > It did not work. I could not minicom to /dev/ttyUSB0 or /dev/ttyUSB1.
> >
> >
> > How can I make the usb-serial device work?
> >
> > Thank you,
> >
> > Arm
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|