Hi
> >Your post looks kind of odd
>
> Sorry, I dodn't know which sub-topic to place it under!
I just ment that I didn't understand the question, but since I have had some
experience with the VIC i thought I could help anyway.
> >I don't know what exactly you are asking for
>
> Specifically about placing the ldr pc,[pc,#-0xFF0] instruction in the IRQ
> offset of the interrupt table.
> I am finding it doesn't work for some
> reason, and wondered whether this was a feature of the EP93xx device.
> Anybody know?
The only thing I know is that I used standard ARM code and didn't detect
anything peculiar... You could study the EP9301 manual since it't more
extensive than the EP9302 (http://www.embeddedarm.com/documentation/third-
party/ts-7000_ep9301-ug.pdf)
>
> >but if you want I and send you some code for a IRQ handler.
>
> Do you have any that is compatible with FreeRTOS?
No, I did everything from scratch. I doubt that it's compatible with anything
=)
Hope that helps
/Per
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|