Thanks! Is this the "linux-2.6.29.1-ts7200_matt-4.tar.gz" file that I need to
apply? I could not find anything else that applies to 2.6.29 or that said
clockevents.
--- In Razvan-Ionut Stoian <>
wrote:
>
> You should apply the "clockevents"Â patch to your kernel sources. You can
> find it in the file section.
>
> --- On Mon, 9/20/10, mailorder_va <> wrote:
>
> From: mailorder_va <>
> Subject: [ts-7000] sub 10ms sleeps/timers in Linu 2.6.29
> To:
> Date: Monday, September 20, 2010, 10:32 AM
>
>
>
>
>
>
>
> Â
>
>
>
>
>
>
>
>
>
> I am trying to get sub 10ms time resolution (1 ms or less needed). I
> compiled 2.6.29 and was able to get it to run on the ts7200. I wrote a simple
> program which does a usleep(100) for 1000 times and it takes 10 seconds to
> run (ie usleep resolution is 10ms). I searched and found mention of
> CONFIG_HIGH_RES_TIMERS - this variable does not seem to be defined in the
> .config file. The CLOCK_HZ in the .config file seems to be set at 100 and I
> cannot seem to change it (ie I can change it but Kconfig sets it back to
> 100). I am probably missing something obvious - just do not know what.
>
>
>
> Any help would be appreciated.
>
>
>
> Thanks
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|