I am trying to get sub 10ms time resolution (1 ms or less needed). I compiled
2.6.29 and was able to get it to run on the ts7200. I wrote a simple program
which does a usleep(100) for 1000 times and it takes 10 seconds to run (ie
usleep resolution is 10ms). I searched and found mention of
CONFIG_HIGH_RES_TIMERS - this variable does not seem to be defined in the
.config file. The CLOCK_HZ in the .config file seems to be set at 100 and I
cannot seem to change it (ie I can change it but Kconfig sets it back to 100).
I am probably missing something obvious - just do not know what.
Any help would be appreciated.
Thanks
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|