As a note - I tried to look at "/proc/timer_list" and the file seems to be a
empty file...
--- In "mailorder_va" <> wrote:
>
> I am trying to get sub 10ms time resolution (1 ms or less needed). I compiled
> 2.6.29 and was able to get it to run on the ts7200. I wrote a simple program
> which does a usleep(100) for 1000 times and it takes 10 seconds to run (ie
> usleep resolution is 10ms). I searched and found mention of
> CONFIG_HIGH_RES_TIMERS - this variable does not seem to be defined in the
> .config file. The CLOCK_HZ in the .config file seems to be set at 100 and I
> cannot seem to change it (ie I can change it but Kconfig sets it back to
> 100). I am probably missing something obvious - just do not know what.
>
> Any help would be appreciated.
>
> Thanks
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|