Hi --
--- In "tachion0niohcat" <> wrote:
>
> There is a LOT of trickery involved getting EABI to work properly on these
> CPUs. The issue is with the GCC compiler, which needs a number of patches. I
> did find a bunch of resources on how to do this and kept some notes. You are
> welcome to it, but the warning is that this is not a simple step.
Sure you don't mean getting maverick crunch to work properly? (Link shows you
tried to use -mfpu=maverick). EABI has been easy & straightforward for me,
using most any toolchain less than about 3 years old. Building your own cross
gcc may harder, but shouldn't be needed unless you need maverick crunch.
Maverick crunch, however, was a quagmire that I abandoned. Benefits were not
worth it, compared to benefits of EABI.
Thanks for the write-ups, though, I didn't see these before.
regards, ........... Charlie
>
> To get a cross compiler with proper EABI:
> http://nuclear.unh.edu/wiki/index.php?title=ARM_Cross_Compiler
>
> To get EABI Lenny:
> http://nuclear.unh.edu/wiki/index.php?title=Creating_an_EABI_Lenny_system
>
> Please keep your own notes on your progress doing this, and then let the
> group know how it went!
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|