Some earlier TS-7200 boards are not compatible with the SerialBlaster as
their watchdog timer reboots the board before it can download its
bootloader. I think this problem was fixed with later board revisions.
Some workstations are too slow to run the unpatched version of
SerialBlaster, if this is your case, look for a patch someone posted to
fix this.
There is also a patch for people that have large page NAND flash. (But I
don't think this effects you)
good luck,
-Curtis.
On Tue, 2010-08-24 at 10:25 -0400, Jason Stahls wrote:
>
> On 8/20/2010 8:34 PM, josemu65 wrote:
> > Hello
> >
> > I am a student and started to use a ts7200 for ARM, in the process I
> have some problems, because when I want to turn on the board, it not
> respond and only turn on the green and red leds all the time, at the
> same time, and when I connect to my PC to a minicom interface, I can
> not see the process to enter in the root and in the redboot.
> >
> > I asked about my problem to the TechnicalSupport‏ and they
> said me:
> >
> > Do you see a RedBoot prompt at all? Without it, it's very difficult
> to
> > restore the TS-7000. You may just want to ship it to us for
> > reprogramming. I believe the charge for this $50. If you'd like to
> go
> > this route, please use the following URL to request an RMA:
> > http://www.embeddedarm.com/about/rma.php
> >
> > Another option is to use the TS-7000 Yahoo! Group community written
> > serialblast utility to boot from COM1 and reblast the board yourself
> > with the tarballs and images available on our FTP site. This utility
> > can be found on the TS-7000 Yahoo! Group under the "Links" page.
> >
> > I prefer the second option, because in the process of the first I
> think will lost a lot of time and I need the ts7200 to make a proyect.
> For this reason I need your help. I speak spanish also, and if any
> person wish write me in spanish I would appreciate.
>
> Search the archives, there's a few step by step posts about how to
> use
> SerialBlaster. It's not too hard from what I remember reading tho
> I've
> never tried it myself. How did you get your 7200 into this state
> anyways?
>
> --
> Jason Stahls
>
>
>
>
--
Curtis Monroe
Wk: 514-316-8487 x230
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|