On 8/20/2010 8:34 PM, josemu65 wrote:
> Hello
>
> I am a student and started to use a ts7200 for ARM, in the process I have
> some problems, because when I want to turn on the board, it not respond and
> only turn on the green and red leds all the time, at the same time, and when
> I connect to my PC to a minicom interface, I can not see the process to enter
> in the root and in the redboot.
>
> I asked about my problem to the TechnicalSupport‏ and they said me:
>
> Do you see a RedBoot prompt at all? Without it, it's very difficult to
> restore the TS-7000. You may just want to ship it to us for
> reprogramming. I believe the charge for this $50. If you'd like to go
> this route, please use the following URL to request an RMA:
> http://www.embeddedarm.com/about/rma.php
>
> Another option is to use the TS-7000 Yahoo! Group community written
> serialblast utility to boot from COM1 and reblast the board yourself
> with the tarballs and images available on our FTP site. This utility
> can be found on the TS-7000 Yahoo! Group under the "Links" page.
>
> I prefer the second option, because in the process of the first I think will
> lost a lot of time and I need the ts7200 to make a proyect. For this reason I
> need your help. I speak spanish also, and if any person wish write me in
> spanish I would appreciate.
Search the archives, there's a few step by step posts about how to use
SerialBlaster. It's not too hard from what I remember reading tho I've
never tried it myself. How did you get your 7200 into this state anyways?
--
Jason Stahls
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|