<> wrote:
>
> That is quite a long-winded email.
Yes, I think I'll repost of my questions in separate mails so I don't scare
readers away from such a long post again.
> A couple of things:
> * ts7400 - does not have audio on it. I don't think any of the other
> ts boards do. You will need to wire up an audio board for the ts7400 if
> you want audio output.
Okay, so no audio out of the box. That's good to know.
> * All of the arm based boards will need a fixed point audio decoder.
> The floating point decoders will be far too slow to get realtime audio
> playback. MAD works great on these boards. You will need to check
> which decoder xmms is using.
Thanks for answering the probably most important question I forgot to ask =).
It seems xmms2 (which is in fact what I'm planning on using) does support MAD
for decoding. Guess that makes me home free?
> Can't you just buy a pre-existing solution and hack it to your desires?
I think these TS-7xxx boards are the closest to what I'm looking for. Remember
I need DIO and ADC too.
> Alternatively, I'd suggest working with an Atom board. The boards
> are tiny and you don't need to piss around with cross compilers, tool
> chains, audio drivers, or any of the nonsense that comes along with arm.
True. I had a look at the atom boards, but they're very expensive and don't
offer the same amount of flash as the ARM boards. Besides, I'm not scared of
cross-toolchains as I've been working with Linux on embedded ARM before. What
scares me, though, is ported drivers for USB WIFI and USB audio. I've had bad
experiences with the first, but since TS supply this, I guess it's a nobrainer.
I just need a confirmed audio solution.
--Stephan
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|