Just tested out USB audio, USB hubs, and the FTDI USB-to-serial drivers and
these work fine.
--- In "Charles" <> wrote:
>
>
> Hi --
>
> --- In "Blair" <bburtan65@> wrote:
> >
> > It appears that I actually have a 2.6.34 kernel up and running on the 7350.
> > I'm not sure if the thing is totally right. If anyone has suggestions on
> > a validation procedure, please share.
>
> Good job! Seems that simultaneous serial port IO and writing to the SD card
> is pretty quick to give people fits, from reading the M/L. That might be a
> good test, as data loggers are targets for these boards.
>
> regards, ..... Charlie
> >
> > I started with Matthieu's patches. This builds fine under a Crosstool-NG
> > toolchain on a Debian system running under Parallels on a Mac. (I would
> > like some Parmesan with my spaghetti code though).
> >
> > The 7350 has a couple of specific drivers that needed a refresh. The
> > tsuart and xuart stuff need some minor semantic modifications. The ts72xx
> > files need additions for the 7350's addresses and such.
> >
> > The SD card driver is a little tricky since it appears to be intended as a
> > built-in rather than a module for the 72xx boards. I haven't gotten it to
> > work as a built-in but I did get it to work as a module. This doesn't
> > appear to be a problem since the FPGA has code to load the kernel off the
> > SD card.
> >
> > I also needed to configure the kernel for built-in RAM disk/initrd support
> > and change the boot string to use that instead of NFS.
> >
> > The kernel images are also too big for the stock partitioning. I already
> > had a slightly larger one but it will only fit the zImage.
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|