If the adc_logger program is the one I wrote, then it only works with the
a ts72xx board with the max197 option. The ts7260 doesn't have a max197
option, so it won't work with that board.
I actually have a ts7260 on loan, for writing software for a weather logger
project at the University of Leeds, so I could have a go at modding this
program to work with the ep9302 in built ADC devices. However, I have to
say I've a lot on at the moment so probably wouldn't be able to do anything
for a month or so.
I have a simpler program that reads the ep9302 adc's. I could email you
that to see if it works.
cheers
Jim
On Wed, 21 Jul 2010, Great Tiger wrote:
> Hello,
> This is my first post, so hello everyone.I tried to run adc_logger
> sample program on my ts-7260 but the output seemed to be that the ADC is
> not there:
> "[adc_logger] No such device or address : Could Not initialise ADC or
> ADC hardware not present."
> Then I tried to run the ADC converter source code on the manual, it hung
> at the loop. Could anyone please let me know why? Anything wrong with my
> ADC or is there any configuration need to be done? Thanks all.
> --Huy
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|