[ts-7000] ADC logger on ts-7260

To:
Subject:	[ts-7000] ADC logger on ts-7260
From:	"Great Tiger" <>
Date:	Wed, 21 Jul 2010 03:26:19 -0000

This is my first post, so hello all.

I tried to run adc_logger sample program on my ts-7260 to log the data on ADC channel 2, but the output seems to be that the ADC is not there:

"[adc_logger] No such device or address : Could Not initialise ADC or ADC hardware not present."

Then I tried to run the A/D converter sample code on the manual but it hanged at the loop.

Could someone tell me why? Anything wrong with my ADC or is there any configuration need to be done? Thanks all.

Huy

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] ADC logger on ts-7260, Great Tiger <=

Previous by Date:	[ts-7000] [ts-7260] ADC logger on ts-7260, Great Tiger
Next by Date:	[ts-7000] TS-7xx0 boards as wifi access points?, Yan Seiner
Previous by Thread:	[ts-7000] [ts-7260] ADC logger on ts-7260, Great Tiger
Next by Thread:	[ts-7000] TS-7xx0 boards as wifi access points?, Yan Seiner
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU