When you insert the USB to serial cable, what does DMESG says about it?
Can you copy and paste the content of "dmesg" after inserting the cable?
Which cable are you using?
Best Regards,
Enrique
--- In "ysuwansiri" <> wrote:
>
>
>
> --- In Jim Jackson <jj@> wrote:>> > > > On
> Tue, 6 Jul 2010, ysuwansiri wrote:> > > Hi,> >> > I have TS-7200.> >> >
> I ran the command /usr/bin/loadUSBModules.sh, but couldn't get the USB >
> > connection to work.> >> > How can I get the USB connection to work?>
> > It might be useful for the rest of us to know what USB device you are>
> using.>Hi,
> I have another debian board, when I do ls in /dev, then it shows:
> MAKEDEV mtd4ro ptypc stderr tty30 tty56 ttypcbus
> mtd5 ptypd stdin tty31 tty57 ttypdconsole mtd5ro
> ptype stdout tty32 tty58 ttypecore mtdblock0 ptypf
> tty tty33 tty59 ttypfdisk mtdblock1 ram0 tty0
> tty34 tty6 urandomfb0 mtdblock2 ram1 tty1 tty35
> tty60 usbdev1.1_ep00fd mtdblock3 ram10 tty10 tty36
> tty61 usbdev1.1_ep81full mtdblock4 ram11 tty11 tty37
> tty62 usbdev2.1_ep00hwrng mtdblock5 ram12 tty12 tty38
> tty63 usbdev2.1_ep81i2c-0 net ram13 tty13 tty39
> tty7 usbdev2.3_ep00initctl null ram14 tty14 tty4
> tty8 usbdev2.3_ep02input port ram15 tty15 tty40
> tty9 usbdev2.3_ep04ixp4xx_ucode ppp ram2 tty16 tty41
> ttyS0 usbdev2.3_ep81kmem psaux ram3 tty17 tty42
> ttyS1 usbdev2.3_ep83kmsg ptmx ram4 tty18 tty43
> ttyUSB0 usbdev3.1_ep00log pts ram5 tty19 tty44
> ttyUSB1 usbdev3.1_ep81loop ptyp0 ram6 tty2 tty45
> ttyp0 usbdev3.2_ep00mapper ptyp1 ram7 tty20 tty46
> ttyp1 usbdev3.2_ep01mem ptyp2 ram8 tty21 tty47
> ttyp2 usbdev3.2_ep82mtd0 ptyp3 ram9 tty22 tty48
> ttyp3 usbdev3.2_ep83mtd0ro ptyp4 random tty23 tty49
> ttyp4 vcsmtd1 ptyp5 rtc tty24 tty5 ttyp5
> vcsamtd1ro ptyp6 rtc0 tty25 tty50 ttyp6
> watchdogmtd2 ptyp7 sda tty26 tty51 ttyp7
> xconsolemtd2ro ptyp8 sda1 tty27 tty52 ttyp8
> zeromtd3 ptyp9 sda2 tty28 tty53 ttyp9mtd3ro
> ptypa shm tty29 tty54 ttypamtd4 ptypb sndstat
> tty3 tty55 ttypb
>
>
> For TS-7200, when I do ls in /dev, then it shows:
> console fb kmem port root tty usbcuaam0
> fd mem ptmx scsi ttyAM0 vccuaam1 full
> mtd pts stderr ttyAM1 vcccuaam2 ide mtdblock
> pty stdin ttyAM2 zerodiscs initctl null random
> stdout urandom
>
> How can I get ttyUSB0 and ttyUSB1 to pop up for TS-7200 board?
> Thank you,
> Arm
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|