Angel, I did what I said on TS-Linux, but do not get it to work. In Debian do not find the file you mention.
What I need is to connect a A/D board to the TS7260 board through the serial port (COM 2).
The software that displays the data of the A/D board runs on Debian Linux on USB flash drive, not on TS-Linux that brings the TS7260 board. Therefore there is where the file you mention.
Any possible solution?
Best Regards ...
Sorry for my English, I speak Spanish.
Ricardo Sifón
> To:
> From:
> Date: Tue, 15 Jun 2010 17:21:25 +0000
> Subject: Re: [ts-7000] COM 2 in Debian - TS7260
>
> Hi,
>
> I think you have to tell not to be a console port.
>
> remove the 'getty' of ttyAM1 in one of the startup scripts.
>
> Rod
>
>
>
> On Tue, 2010-06-15 at 15:56 +0000, pasionportrinidad wrote:
> >
> > How do I enable the com port 2 TS7260 board in Debian?
> > How do I set the com port 2 of the TS7260 board to operate at 38400
> > bps?
> >
> > Ricardo Sífon
> >
> >
> >
> >
> >
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
> <*> To visit your group on the web, go to:
> http://groups.yahoo.com/group/ts-7000/
>
> <*> Your email settings:
> Individual Email | Traditional
>
> <*> To change settings online go to:
> http://groups.yahoo.com/group/ts-7000/join
> (Yahoo! ID required)
>
> <*> To change settings via email:
>
>
>
> <*> To unsubscribe from this group, send an email to:
>
>
> <*> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
__._,_.___
![]()
__,_._,___
|
|