Ricardo,
Configure serial port COM2 for connection of digitizer:
cd /etc
vi inittab
comment out line:
#lgn:12345:respawn:/sbin/getty âL 115200 ttyAM1
You will have to reboot
Saludos,
Angel
On Thu, 2010-06-17 at 02:51 +0000, Ricardo Sifon wrote:
>
> Angel, I did what I said on TS-Linux, but do not get it to work. In
> Debian do not find the file you mention.
> What I need is to connect a A/D board to the TS7260 board through the
> serial port (COM 2).
> The software that displays the data of the A/D board runs on Debian
> Linux on USB flash drive, not on TS-Linux that brings the TS7260
> board. Therefore there is where the file you mention.
>
> Any possible solution?
>
> Best Regards ...
>
> Sorry for my English, I speak Spanish.
>
> Ricardo SifÃn
>
>
>
> > To:
> > From:
> > Date: Tue, 15 Jun 2010 17:21:25 +0000
> > Subject: Re: [ts-7000] COM 2 in Debian - TS7260
> >
> > Hi,
> >
> > I think you have to tell not to be a console port.
> >
> > remove the 'getty' of ttyAM1 in one of the startup scripts.
> >
> > Rod
> >
> >
> >
> > On Tue, 2010-06-15 at 15:56 +0000, pasionportrinidad wrote:
> > >
> > > How do I enable the com port 2 TS7260 board in Debian?
> > > How do I set the com port 2 of the TS7260 board to operate at
> 38400
> > > bps?
> > >
> > > Ricardo SÃfon
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>
>
>
>
> ______________________________________________________________________
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|