Sorry if this shows up twice; I seem to be having a local partial outage
of some sort.
The TS-7200 manual says:
The Ethernet PHY chip can be powered down, under software control, to save
approximately 90 mA of current consumption. This is controlled by the
EP9302 Digital output on Port H, bit 2. A logic zero will power down the
KS8721 PHY interface.
Before I go reinventing the wheel, is there a /sys or /proc interface
that lets me do this? I am running 2.6.29 with Mattheiu Crapet's patches.
Also, I have the 2x24 LCD display. The technologic website has no
documentation on this. Anyone know if there is a way to turn off the
backlight or to power it down under software control?
Thanks,
--Yan
--
o__
,>/'_ o__
(_)\(_) ,>/'_ o__
A day may come (_)\(_) ,>/'_ o__
when the courage of men fails, (_)\(_) ,>/'_
when we forsake our friends and break all (_)\(_)
bonds of fellowship, but it is not this day.
It is not this day!
This day we ride!
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|