--- In "cptdondo" <> wrote:
>
> I'm trying to build a kernel for my 7200 with the MAX-197 A/D.
>
> The board is fine, as it boots with both the 2.4 and 2.6 kernels from
> Technologic; however, none of those gave me a working CF card. I need the CF
> card for my project.
>
> However, I can't get a bootable kernel from source. I'm trying to build a
> 2.6.29.6 kernel, in the hope that the adc driver will build against it.
> However, the board hard locks as soon as it uncompresses the kernel. Using
> an uncompressed kernel results in an immediate hardlock. No messages on the
> console, just "using base address XXX" followed by "uncompressing Linux......
> done, booting the kernel." and then the machine stops responding to pings and
> locks.
>
> Does anyone have a working recent kernel config they can share? Ideally one
> that includes the cf card and the adc drivers for the 7200?
>
> I am using crosstools-ng as the toolchain, with the config posted here in the
> files section.
>
Please create your own thread rather than trying to hijack this one.
I posted the config and may be able to help. But not by confusing Yan's issues
here.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|