I'm trying to build a kernel for my 7200 with the MAX-197 A/D.
The board is fine, as it boots with both the 2.4 and 2.6 kernels from
Technologic; however, none of those gave me a working CF card. I need the CF
card for my project.
However, I can't get a bootable kernel from source. I'm trying to build a
2.6.29.6 kernel, in the hope that the adc driver will build against it.
However, the board hard locks as soon as it uncompresses the kernel. Using an
uncompressed kernel results in an immediate hardlock. No messages on the
console, just "using base address XXX" followed by "uncompressing Linux......
done, booting the kernel." and then the machine stops responding to pings and
locks.
Does anyone have a working recent kernel config they can share? Ideally one
that includes the cf card and the adc drivers for the 7200?
I am using crosstools-ng as the toolchain, with the config posted here in the
files section.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|