ts-7000
[Top] [All Lists]

[ts-7000] Using Spi on TS-7260 board

To:
Subject: [ts-7000] Using Spi on TS-7260 board
From: "amitaryan_king4ever" <>
Date: Mon, 07 Jun 2010 10:36:10 -0000
Dear experts ,
I am using TS-7260 board for my data acquisition project.I need to use the spi 
pins on the board. But there is no native support for the spi driver in the 
2.4.... kernel (native kernel shipped wid product). 

I compiled new kernel 2.6.34 with spi driver and it was successful . The 
company guys have provided everything on the SD card with the first parition of 
unknown type and wen i tried to DD there it was panic ...

Next i tried with the procedure to boot kernel 2.6.34 inside 2.4.26ts ... 
through the bootloader utility. there also it is giving me errors of 
msg was :
List of all partitions:                                                         
1f00              16 mtdblock0 (driver?)                                        
1f01           29696 mtdblock1 (driver?)                                        
1f02            3056 mtdblock2 (driver?)                                        
No filesystem could mount root, tried:  ext3 ext2 vfat msdos                    
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,1)

I need some help on this matter . My prime focus is to use spi on this device 
... 

regards 
Amit 



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU