Re: [ts-7000] TS-7800 FPGA- PRocessor Interface

To:
Subject:	Re: [ts-7000] TS-7800 FPGA- PRocessor Interface
From:	Mike Ingle <>
Date:	Mon, 3 May 2010 06:49:00 -0700

I also sometimes forget to use google. aA search on ts7800 pc wiki gives: http://ts78xx.digriz.org.uk/FrontPage I replied once on this, I don;t know if it came through though.

note there is a zip file yoiu need to download. The site crashed. Anyway, It used to explain what to do to use the Lattice FPGA

Regards,

Mike

On May 3, 2010, at 1:45 AM, parth wrote:

Have Anybody used Lattice ECP2 for hardware development and interface to Processor in TS-7800?
Please guide me about that?

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS-7800 FPGA- PRocessor Interface, parth Re: [ts-7000] TS-7800 FPGA- PRocessor Interface, Mike Ingle <=

Previous by Date:	[ts-7000] FYI: setuid + pthreads is bad!, Robert Ulbrich
Next by Date:	[ts-7000] Re: Problems booting from the SD card using TS7260 board, jgarciallamas
Previous by Thread:	[ts-7000] TS-7800 FPGA- PRocessor Interface, parth
Next by Thread:	[ts-7000] Reading a USB Keyboard input, jeffmigliore
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU