[ts-7000] TS-7800 FPGA- PRocessor Interface

ts-7000

[ts-7000] TS-7800 FPGA- PRocessor Interface

from [parth]

To:
Subject:	[ts-7000] TS-7800 FPGA- PRocessor Interface
From:	"parth" <>
Date:	Mon, 03 May 2010 08:45:18 -0000

Have Anybody used Lattice ECP2 for hardware development and interface to 
Processor in TS-7800?
Please guide me about that? 



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS-7800 FPGA- PRocessor Interface, parth <= Re: [ts-7000] TS-7800 FPGA- PRocessor Interface, Mike Ingle

Previous by Date:	[ts-7000] Re: PCI use Code example, parth
Next by Date:	[ts-7000] Reading a USB Keyboard input, jeffmigliore
Previous by Thread:	[ts-7000] Re: PCI use Code example, parth
Next by Thread:	Re: [ts-7000] TS-7800 FPGA- PRocessor Interface, Mike Ingle
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU