Hi Ivan.
A> Check that the X Widows subsystem is running ( "ps aux|grep X" or have a
look at proc.fs to check its operational.
B> Check that /etc/X11/ config is "sane" and reasonable.
C> Try bringing up XDM or VNC directly on the 7390 (assuming your got the h/w
to do so).
D> Checkout the /var/log/X.log messages to see if there is something missing.
Cheers. Grahame
--- In "vancka" <> wrote:
>
> Hi,
> I am trying to connect trough VNC (X11VNC)to current DISPLAY:0.0 but the
> program refuse to start because X server does not allow that.
> I am getting the following error:
>
> Xlib: connection to ":0.0" refused by server
> Xlib: No protocol specified
>
> Regards,
> Ivan
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|