[ts-7000] Help with TS7260 COM1 port pls

["Alex" <>]

I have a TS-7260 that suppose to read data from tilt sensor over RS-232.
The COM2 on TS7260 is already used for different purposes. So my choices are 
either to use COM1 or COM3.  I am trying to use COM1, and everything works fine 
as long as I plug in tilt sensor into COM1 after TS7260 booted up.  However 
TS-7260 would not boot up with tilt sensor connected on COM1.  Did anybody ran 
into similar problem with COM1?  Any ideas how to solve it?  If not, can 
somebody help me how to activate and access COM3 on TS7260?

- Alex



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/