[ts-7000] changing console from COM1 to COM2???

To:
Subject:	[ts-7000] changing console from COM1 to COM2???
From:	"nikocobain13" <>
Date:	Thu, 11 Mar 2010 12:23:50 -0000

Hi, I want to change console from COM1 to COM2. I did it, but only when I'm 
running on debian. Before that, on linux kenel, console is on COM1. I'm 
thinking in 2 different options:

- change console from COM1 to COM2 on kernel.

- do the system boot direct to debian.

but how can I do it?



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] changing console from COM1 to COM2???, nikocobain13 <= [ts-7000] Re: changing console from COM1 to COM2???, nikocobain13

Previous by Date:	Re: [ts-7000] Connect with CMUCAM, Muchammad Fachri
Next by Date:	Re: [ts-7000] TS-BAT3 Operation Question, Jeff O'Brien
Previous by Thread:	[ts-7000] Connect with CMUCAM, fahri_4265
Next by Thread:	[ts-7000] Re: changing console from COM1 to COM2???, nikocobain13
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU