[ts-7000] Re: TS-7400 boot issues with 2.6.29

["mattfishburn" <>]

Moving /etc/init.d/hwclock.sh and /etc/init.d/hwclockfirst.sh allows me to 
boot!  Thank you.

But what exactly did I do?  I don't believe I'm using a TS-7400 with an RTC 
module, but I don't know for sure.  How do I check?  Should I do anything after 
I am able to boot into 2.6.29 to "fix" the hwclock?

--- In  Petr Ledvina <> wrote:
>
> Probably stupid question, but are you using RTC version of ts7400?
>
> Try to disable /etc/init.d/hwclock and /ect/init.d/hwclockfirst . This
> should let you boot correctly.
> Then try to find what's wrong with RTC from fully booted system  ...
>
> Petr
>
> On Wed, Feb 3, 2010 at 10:39, mattfishburn <> wrote:
>
> >
> >
> > I was concerned this was an issue with the SD card I was using so I tried a
> > different SD card, but I had the exact same behavior. Thus the problem
> > probably isn't the SD card.
> >
> > Cheers,
> > matt
> >
> >
> > --- In  <ts-7000%40yahoogroups.com>, "mattfishburn"
> > <mattfishburn@> wrote:
> > >
> > > Hi,
> > >
> > > I am trying to use kernel 2.6.29 on my TS-7400. I downloaded the image
> > from
> > >
> > >
> > ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7400-linux/binaries/ts-images/512mbsd-7400-linux2629-lenny-eabi.dd.bz2
> > >
> > > and used dd to write the unzipped image to my SD card. I followed the
> > directions at
> > >
> > > http://tech.groups.yahoo.com/group/ts-7000/message/15901
> > >
> > > to enable sdboot instead of flash boot. I am able to boot using
> > TS-SDBOOT, but when I attempt to boot into the 2.6.29 kernel, the boot
> > process hangs at "Setting the system clock." In the TS-SDBOOT prompt I
> > attempted to query the hwclock, but this also hangs.
> > >
> > > Am I missing something obvious to enable the hwclock?
> > >
> > > Here is the output from a standard start-up:
> > >
> > > =====================================================
> > >
> > > >> TS-SDBOOT - built Jan 26 2007
> > > >> Copyright (c) 2007, Technologic Systems
> > > .
> > > .
> > > .
> > > Uncompressing
> > Linux......................................................................................................
> > done, booting the kernel.
> > > Finished booting in 4.37 seconds
> > > Type 'tshelp' for help
> > > / # exit
> > > >> Booting Linux (using SD Card)...
> > > INIT: version 2.86 booting
> > > Setting the system clock.
> > >
> > >
> > > At this point the console receives no more information for several
> > minutes.
> > >
> > > =====================================================
> > >
> > > Here is output from a call to hwclock hanging:
> > >
> > > >> TS-SDBOOT - built Jan 26 2007
> > > >> Copyright (c) 2007, Technologic Systems
> > > .
> > > .
> > > .
> > > Uncompressing
> > Linux......................................................................................................
> > done, booting the kernel.
> > > Finished booting in 4.37 seconds
> > > Type 'tshelp' for help
> > > / # cat /proc/driver/rtc
> > > rtc_time : 63:255:255
> > > rtc_date : 2255-255-255
> > > 24hr : yes
> > > mode : binary
> > > battery : ok
> > > / # hwclock --debug
> > > hwclock from util-linux-ng 2.13.1.1
> > > Using /dev interface to clock.
> > > Last drift adjustment done at 161 seconds after 1969
> > > Last calibration done at 161 seconds after 1969
> > > Hardware clock is on UTC time
> > > Assuming hardware clock is kept in UTC time.
> > > Waiting for clock tick...
> > > /dev/rtc0 does not have interrupt functions. Waiting in loop for time
> > from /dev/rtc0 to change
> > >
> > >
> > > At this point the console receives no more information for several
> > minutes.
> > >
> >
> > 
> >
>
>
>
> --
>       Ing. Petr Ledvina
>        ekoTIP ID s.r.o.
> identifikaÄ?ní technologie
> Morseova 1126/5 30100 PlzeÅ?
>         tel:608101056
> www: ekotip.cz  
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/