shentasa wrote:
> Hi,
>
> I've worked with TS-7260 and I've connected to it via COM1 at 115200 baud.
> I've already installed kermit for ARM and try to connect to another PC that
> works 9600 baud via COM2(dev/ttyAM1) but i cant.
>
> Is there an special configuration to work at this speed? I have no problem
> connecting to this PC from my laptop via kermit.
Kermit, now there's a protocol I haven't seen in ages... :) When you
connected with your laptop did you connect at 9600 or 115200? Normally
you'll need to disable any getty on /dev/ttyAM1 in /etc/inittab and
you'll also need to set the serial port speed if your program doesn't
with setserial.
--
Jason Stahls
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|