Hi Peter,
I sit barely 15 feet from an AP, perhaps that's not close enough!
Anyway, in this application, the machine will need to boot into ad-hoc mode and
-create- the network. It can't count on joining one already existing.
Thanks,
-harold
--- In Peter Harrison <> wrote:
>
> On Thu, Jan 28, 2010 at 10:50 PM, th4rold <> wrote:
> > Hi,
> >
> > I've been trying to get Wifi working on the TS-7260. I have gotten as far
> > as insmodding zdb.o, which does create a network interface (cat
> > /proc/net/dev shows that wlan0 exists) but if I try:
> > ifconfig wlan0 up
> > the whole machine hangs up! Not instantly but always within a couple of
> > seconds. This happens with both the TS-7260 and TS-7300 which I used just
> > for testing.
> >
>
>
> I had the same thing.
>
> Funny thing was that if I moved closer to the Wifi access point the
> problem went away. Seems that if the Wifi access point is out of range
> it would read the SSID - aka you could get a list of networks, but if
> you try to connect it would either fail to connect or actually hand
> the entire machine.
>
> Moving it a few feet from the access point solved it; but obviously
> this is far from ideal
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|